Ready for the milk, nipple cup will be in a minute. Each nipple cups must be installed in the form of sliding and should try to reduce the air into the nipple cup.

Check the goats velocity, milking machine should be adjusted when necessary

Check each nipple milk flow. Adjust the position of the milking machine. Only the milking machine properly adjust the milk can be quickly and completely, adjust the milking machine in the most appropriate position. Nipple cup if the installation does not often cause slipping and appropriate milk flow is blocked, these factors all can cause mastitis.

Should avoid milking machine to produce abnormal noise. When necessary to adjust the milking machine during milking. Air into the nipple cups of milk can cause tiny drops back to nipple pool at a high speed. If these milk drops are bacterial contamination, bacteria can take in and cause mastitis. This kind of situation is often occurred in slows down milk and before the end of milk.

End milking should first turn off the vacuum pump, then unload nipple cup

Milk should not be excessive. Most of the sheep will be done in 3 ~ 5 minutes row of milk. Using work normal milking machine, milking time more than 1 ~ 2 minutes not cause breast inflammation. Avoid using milking machine to drain last goat's milk. In the past, people used to massage the breast with milking machine and squeeze out the last drop of milk. This way should be completely eliminated, because this method increase stress and air into the nipple milking machine, so will also increase the risk of suffering from mastitis. After turn off the milking machine, first remove the nipple cup. If under the vacuum state to unload nipple cup nipple damage and will increase the chance of infection, because this way can cause rubber nipple cup inside casing slippage.

With safe and effective disinfectant soaking or spraying disinfection nipple